hi there,
first, I was really surprised to find such a awesome synth freeware. it sounds so much better than other freeware synths!!!!
now, i'm used to work with modular software (as i once had a micro modular), so I'm familiar with the basic idea behind it and how it basically works. but: i don't manage to construct a simple synth in the karmafx synth. i don't achive, say, adsr envelope to control the amplitude of the osc. once i routed the adsr to the main volume of the synth (and it worked) but then obviously all fx are useless and i think that's no the way you do it. i deconstructed several presets but i didn't find out what i did wrong...
could someone tell me step by step how to program a very simpe synth, please? where to put what in the signal chain and stuff...
thanks in advance, esther
a little confused with the synth...
-
- Posts: 233
- Joined: 25 Oct 2005 04:06
- Contact:
Make an Osc, that generates a constant tone....then route the osc into a note pitch controller, so you can play it like a synth on a keyboard.....then route the note controller into an amp....then make an adsr, and route it into the amp knob of the amp module...and on the amp module, uncheck the "gate" option....then make as many effects and filters as you need, and route the signal thru, until you route it to the output
The confusion is understandable...
All modules that feed their signal to a controller will automatically receive a "frequency signal" that the controller generates. You never see this signal, and basically don't have to worry about it.
The reason for this design is simply to avoid clutter in the wiring, since this connection as almost always needed.
All modules that feed their signal to a controller will automatically receive a "frequency signal" that the controller generates. You never see this signal, and basically don't have to worry about it.
The reason for this design is simply to avoid clutter in the wiring, since this connection as almost always needed.